Product Description
High End Best Selling thickness 428h 132l motorcycle drive chain for Chain Kit
We also supply motorcycle chain 25, 25H, 06B, 415, 415H, 420, 420H, 428, 428H, 520, 520H, 525, 525H, 530, 530H, 630, O ring and X ring chain and so on, our chains are both excellent in quality and reasonable in price
1.Good quality and reasonable price
2.Has taken measure to better antirust
3.Long-life duration and high strength
4.Pre-stretching and running for each motor chain before delivery
5.Riveting: Two sides riveting or 4 sides riveting
6.All parts are heat treatment (quenching and tempering) and controlled in a reasonable tolerance range
7.We can also produce as your sample or drawing
8.Packing: According to your demand to design
Specifications are as follows:
|
Chain No. |
Pitch |
Roller diameter |
Width between inner plates |
Pin diameter |
Pin length |
Inner plate depth |
Plate thickness |
Ultimate tensile strength |
Average tensile strength |
Fatigue |
|
|
p |
d1 max |
b1 min |
Ld2 max |
max |
Lc max |
h2 max |
T1 |
Q min |
Q0 |
amx |
|
|
mm |
mm |
mm |
mm |
mm |
mm |
mm |
mm |
kn |
kn |
kgf |
|
|
06B |
9.525 |
6.35 |
5.72 |
3.28 |
13.2 |
14.2 |
8.2 |
1.3 |
9 |
10 |
|
|
415 |
12.7 |
7.75 |
4.88 |
3.96 |
12.5 |
13.9 |
10.4 |
1.3 |
11.6 |
12.5 |
380 |
|
415H |
12.7 |
7.75 |
4.88 |
3.96 |
13.1 |
14.5 |
11.5 |
1.5 |
15.6 |
16.1 |
380 |
|
420 |
12.7 |
7.77 |
6.35 |
3.96 |
14.5 |
16.1 |
12 |
1.5 |
16 |
16.5 |
380 |
|
420H |
12.7 |
7.77 |
6.35 |
3.96 |
15.7 |
17.4 |
12 |
1.8 |
17 |
17.5 |
380 |
|
428 |
12.7 |
8.51 |
7.75 |
4.45 |
16.5 |
18.05 |
12 |
1.6 |
17.8 |
18.5 |
380 |
|
428H |
12.7 |
8.51 |
7.75 |
4.45 |
18.3 |
19.08 |
12 |
2.03 |
20.6 |
21.1 |
450 |
|
428HG |
12.7 |
8.51 |
7.75 |
4.51 |
18.9 |
20.1 |
12.3 |
2 |
20.6 |
21.5 |
450 |
|
520 |
15.875 |
10.16 |
6.35 |
5.08 |
17.7 |
19 |
15 |
2 |
26.5 |
29.5 |
650 |
|
520H |
15.875 |
10.16 |
6.35 |
5.24 |
18.9 |
20.5 |
15 |
2.42 |
30 |
31 |
700 |
|
525 |
15.875 |
10.16 |
7.94 |
5.08 |
18.8 |
20.5 |
15 |
2.03 |
26.6 |
29 |
650 |
|
525H |
15.875 |
10.16 |
7.74 |
5.24 |
20.4 |
22.2 |
15 |
2.42 |
30 |
31 |
700 |
|
530 |
15.875 |
10.16 |
9.4 |
5.08 |
20.9 |
22.2 |
15 |
2 |
26.5 |
29.7 |
650 |
|
530H |
15.875 |
10.16 |
9.4 |
5.08 |
21.9 |
24.2 |
15 |
2.42 |
30 |
31.5 |
700 |
|
630 |
19.05 |
11.91 |
9.4 |
5.94 |
22.2 |
24 |
18 |
2.4 |
35 |
37 |
800 |
HangZhou CHINAMFG Industry Co., Ltd. is a specialized supplier of a full range of chains, sprockets, gears, gear racks, v belt pulley, timing pulley, V-belts, couplings, machined parts and so on.
Due to our CHINAMFG in offering best service to our clients, understanding of your needs and overriding sense of responsibility toward filling ordering requirements, we have obtained the trust of buyers worldwide. Having accumulated precious experience in cooperating with foreign customers, our products are selling well in the American, European, South American and Asian markets.Our products are manufactured by modern computerized machinery and equipment. Meanwhile, our products are manufactured according to high quality standards, and complying with the international advanced standard criteria.
With many years’ experience in this line, we will be trusted by our advantages in competitive price, one-time delivery, prompt response, on-hand engineering support and good after-sales services.
Additionally, all our production procedures are in compliance with ISO9001 standards. We also can design and make non-standard products to meet customers’ special requirements. Quality and credit are the bases that make a corporation alive. We will provide best services and high quality products with all sincerity. If you need any information or samples, please contact us and you will have our soon reply.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Type: | Chain |
|---|---|
| Material: | Alloy Steel |
| Certification: | ISO9001：2001 |
| Number of Row: | Single Row |
| Surface Treatment: | Zinc Plated, Sand Blasting, Dull Polish |
| Surface: | Golden, Black, Blue, Grey |
| Customization: |
Available
| Customized Request |
|---|
How does the material hardness of a drive chain affect its durability?
The material hardness of a drive chain plays a significant role in determining its durability and resistance to wear. Here is a detailed explanation:
Material hardness refers to the ability of a material to resist indentation, abrasion, and penetration by external forces. In the context of drive chains, the hardness of the chain’s components, such as pins, bushings, and rollers, directly affects the chain’s durability and lifespan.
When it comes to drive chain durability, the following factors come into play:
- Resistance to Wear: A higher material hardness typically results in better resistance to wear. Drive chains with harder materials can withstand the friction and contact forces encountered during operation, minimizing the wear on critical components. This translates to extended chain life and reduced maintenance requirements.
- Impact Resistance: The material hardness of a drive chain also affects its ability to resist impact forces. Chains operating in environments with frequent impacts or shock loads, such as in mining or heavy-duty applications, require high hardness materials to withstand the sudden stresses without deformation or failure.
- Resistance to Deformation: Harder materials exhibit greater resistance to deformation under load. This is particularly important in drive chains where precise interlocking of chain components is necessary for efficient power transmission. Chains with higher material hardness maintain their shape and dimensional integrity, ensuring consistent performance and minimizing the risk of chain elongation or misalignment.
- Corrosion Resistance: While material hardness primarily affects wear resistance, it can indirectly impact the chain’s resistance to corrosion. Certain high-hardness materials, such as stainless steel or specific alloys, offer improved corrosion resistance compared to softer materials. This is especially relevant in applications where the chain is exposed to corrosive environments, such as marine or chemical industries.
It is important to note that while higher hardness generally leads to improved durability, excessive hardness can also result in brittleness and reduced impact resistance. Therefore, a balance must be struck between hardness and other mechanical properties to ensure optimal performance and durability of the drive chain.
Manufacturers typically specify the appropriate hardness level for drive chain components based on the specific application requirements. These specifications take into account factors such as load capacity, operating conditions, anticipated wear rates, and desired service life.
Regular maintenance practices, such as proper lubrication, periodic inspection, and tension adjustment, are essential for maximizing the durability and performance of the drive chain, regardless of its material hardness.
By selecting a drive chain with the appropriate material hardness and implementing proper maintenance practices, operators can ensure optimal durability, extended chain life, and reliable power transmission in various industrial applications.
Can a drive chain be used in a medical or healthcare application?
Yes, a drive chain can be used in certain medical and healthcare applications where reliable and precise power transmission is required. Here is a detailed explanation:
In medical and healthcare settings, various equipment and devices rely on efficient power transmission to perform critical functions. While drive chains may not be used in all medical applications, they can be suitable for specific applications that involve controlled movement, precision, and durability. Here are some examples:
- Medical Imaging Systems: Drive chains can be used in medical imaging systems such as CT scanners, MRI machines, and X-ray machines. These systems often require precise and synchronized movement of components for image acquisition. Drive chains enable accurate positioning and controlled motion, ensuring the necessary alignment and stability during the scanning process.
- Robotic Surgery Systems: Robotic surgery systems require precise and reliable power transmission to control the movement of robotic arms and surgical instruments. Drive chains can be used to transmit power and ensure accurate positioning, enabling surgeons to perform delicate procedures with enhanced precision and control.
- Rehabilitation and Physical Therapy Equipment: Drive chains can be incorporated into rehabilitation and physical therapy equipment such as exercise machines or motorized devices used for therapeutic purposes. These chains allow for adjustable resistance, controlled movement, and precise range of motion, assisting patients in their recovery and rehabilitation processes.
- Medical Equipment Mobility: Drive chains can be utilized in medical equipment such as hospital beds, stretchers, or mobile carts, where controlled and smooth movement is necessary. Drive chains enable adjustable height, positioning, and mobility, ensuring safe and precise patient handling and transport within healthcare facilities.
It is important to note that in medical and healthcare applications, specific regulations, standards, and guidelines must be followed. The design, material selection, and installation of drive chains should comply with the applicable medical industry standards and safety requirements.
Additionally, regular maintenance, including inspection, lubrication, and tension adjustment, is crucial to ensure optimal performance and reliability of the drive chain in medical and healthcare applications.
By utilizing drive chains in select medical and healthcare applications, operators can benefit from precise power transmission, accurate positioning, controlled movement, and enhanced functionality, contributing to improved patient care and medical outcomes.
editor by CX 2024-05-07