Product Description
Detailed Photos
Product Description
An overhead conveyor is a type of conveyor system that is installed above the working area, typically in a manufacturing or industrial setting. It is used to move products, materials, or components from 1 point to another in a factory or warehouse, and is particularly useful for transporting heavy or bulky items that are difficult to move manually.
Overhead conveyors are commonly used in a variety of applications, such as automotive assembly lines, food and beverage processing, material handling and distribution, and storage and retrieval systems. They can be used for both horizontal and vertical transportation and can move products along a fixed path or in a continuous loop.
Some specific uses of overhead conveyors include:
-
Assembly line transportation: Overhead conveyors are commonly used in manufacturing assembly lines to transport parts and components to different workstations along the line.
-
Powder coating: Overhead conveyors are used in powder coating operations to move products through a paint booth, where they are coated with a dry powder before being cured in an oven.
| Spare parts item | Features | Photo |
| Up-Down track | for rising or falling areas. standard diameter is 1.2 meters,180º angle. it can be cut based on any necessary angles of any install conditions.the angle should not be more than 45º angle. the distance between 2 adjiacent hangers should be considered. | |
| Check track | There is a hatch which can open the track, through the hatch, worker can dismantle or install, check or maintain the conveying chains. Driving device for each conveying route is usually located between driver and take-up device for easy checking and maintenace. | |
| Take-up device
(Tensioner) |
Keep the chains in the state of original tension and compensate for the tensile deformation caused by tensile force or telescopic deformaton caused by varied temperature while working. Make sure certain tensile force between driver and take-up device. Install it behind driver about distance 3~6 meters. Better have no up-down track behind take-up device. |
|
| Straight track | for where conveyor chain go straight. it can be cut according to the specific install condition. standard length is 3 meters. | |
| Caterpiller driver device | Two types-Standard type and heavy duty type. The driving device adjust the momentum that the motor ouput, after speed reduction unit increase its power which is to be passed to the driver caterpiller, the pusher dogs on which transport the chain so that chain can move forward. |
|
| Hanger | Several types hangers: Cross type hanger; Y type hanger; I type hanger; Sprocket wheel hanger; U-type hanger; Bearing hanger; Customized. |
|
| Automatic oil sprayer | Specially designed for various automatic conveying chain;
More convenient to check oil-feeding diyusyion nsdrf CHINAMFG oil volume in the transparent oil pipes. |
FAQ
Q1: Are you trading company or manufacturer ?
A: We are factory.
Q2: How long is your delivery time and shipment?
1.Sample Lead-times: generally 30 workdays.
2.Production Lead-times: 60 workdays after getting your deposit.
Q3. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery.
We’ll show you the photos of the products and packages before you pay the balance.
Q4: What is your advantages?
1. Manufacturer,the most competitive price and good quality.
2. Perfect technical engineers give you the best support.
3. OEM is available.
4. Rich stock and quick delivery.
Q5. If you can’t find the product on our website,what do you next?
Please send us inquiry with product pictures and drawings by email or other ways and we’ll check
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Material: | Alloy |
|---|---|
| Structure: | Roller Chain |
| Surface Treatment: | Polishing |
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
How does the lubrication method affect the performance of a drive chain?
The lubrication method used for a drive chain has a significant impact on its performance and longevity. Here is a detailed explanation:
Proper lubrication is essential for ensuring the smooth and efficient operation of a drive chain. It reduces friction, minimizes wear, and prevents corrosion between the chain’s moving parts. The lubrication method chosen can affect the performance of the drive chain in the following ways:
- Reduced Friction and Wear: Adequate lubrication forms a protective layer between the chain’s moving parts, reducing metal-to-metal contact and minimizing friction. This helps to prevent excessive wear, elongation, and premature failure of the chain. The lubricant acts as a barrier, allowing the chain to operate with reduced resistance and improved efficiency.
- Heat Dissipation: Proper lubrication helps dissipate heat generated by the friction between the chain’s components during operation. This prevents overheating and the potential degradation of the lubricant, ensuring the chain can operate within its designed temperature range. Effective heat dissipation contributes to the longevity and optimal performance of the drive chain.
- Protection against Corrosion: Lubrication provides a protective coating on the chain, safeguarding it against moisture, contaminants, and corrosive substances. This is particularly important in environments where the chain is exposed to water, chemicals, or harsh operating conditions. The lubricant prevents rust and corrosion, preserving the integrity of the chain and extending its service life.
- Reduction of Noise and Vibration: Proper lubrication helps to reduce noise and vibration generated by the drive chain during operation. It acts as a damping agent, absorbing and minimizing the transmission of vibrations, resulting in smoother and quieter chain operation. This contributes to a more comfortable and productive working environment.
- Selection of Lubricant: The choice of lubricant depends on various factors, including the application, operating conditions, temperature, speed, and load requirements. Different lubricants, such as oils, greases, or solid lubricants, may be suitable for different applications. The lubricant must be compatible with the chain material and should possess the necessary viscosity, temperature resistance, and lubricating properties to meet the specific demands of the drive chain.
- Appropriate Lubrication Frequency: The lubrication method also includes determining the appropriate frequency for lubrication. Regular lubrication intervals must be established based on the chain’s operating conditions and the manufacturer’s recommendations. Insufficient lubrication or over-lubrication can both lead to performance issues, such as increased friction, poor lubricant distribution, or accelerated contamination buildup.
It is crucial to follow the manufacturer’s guidelines and recommendations regarding lubrication methods, lubricant types, and lubrication intervals for the specific drive chain. Regular inspection and maintenance should be conducted to monitor the lubrication effectiveness and ensure proper lubricant replenishment.
By selecting the appropriate lubrication method and maintaining proper lubrication, operators can optimize the performance, reliability, and lifespan of the drive chain, contributing to smoother operation, reduced wear, and improved overall efficiency.
Can a drive chain be used in a food processing or packaging application?
Yes, a drive chain can be used in food processing and packaging applications, provided that certain considerations are taken into account. Here is a detailed explanation:
In food processing and packaging applications, where hygiene, cleanliness, and compliance with food safety regulations are crucial, drive chains offer several benefits:
- Reliable Power Transmission: Drive chains provide efficient and reliable power transmission, making them suitable for various applications in food processing and packaging machinery, such as conveyors, mixers, filling machines, and labeling equipment.
- Corrosion Resistance: To ensure compliance with hygiene standards, it is essential to select drive chains made from materials that are resistant to corrosion, such as stainless steel or food-grade plastic. These materials can withstand frequent cleaning, exposure to water, and the corrosive effects of certain food products or cleaning agents.
- Easy Cleaning and Maintenance: Drive chains designed for food applications often feature smooth surfaces and easy-to-clean designs, minimizing the risk of food buildup or contamination. They can be cleaned using standard cleaning methods and equipment, allowing for efficient sanitation and reducing the chances of foodborne contamination.
- Compliance with Food Safety Regulations: When using drive chains in food processing or packaging applications, it is essential to ensure compliance with food safety regulations, such as FDA (Food and Drug Administration) guidelines or other relevant standards specific to the industry or region. This includes selecting materials that are approved for food contact and implementing proper cleaning and maintenance procedures.
- Product Handling: Drive chains can handle various types of food products, including dry goods, packaged items, or even delicate food items, depending on the specific chain design and application requirements. Specialized chains with attachments or gripper systems can be used to securely transport and manipulate food products during processing or packaging.
It is important to work with reputable chain manufacturers or suppliers who offer drive chains specifically designed for food processing and packaging applications. They can provide guidance on chain selection, material compatibility, compliance with food safety regulations, and maintenance practices.
By considering these factors and implementing proper chain selection, installation, cleaning, and maintenance procedures, drive chains can be safely and effectively utilized in food processing and packaging applications while ensuring product quality, hygiene, and compliance with food safety standards.
Can a drive chain be used in environments with high temperatures?
Yes, a drive chain can be used in environments with high temperatures, but there are certain considerations to keep in mind. Here’s an explanation:
Drive chains can operate in high-temperature environments, but the selection of the appropriate chain and proper maintenance practices are crucial for ensuring their performance and longevity:
- 1. Heat-Resistant Materials: When operating in high-temperature environments, it is important to choose a drive chain made from heat-resistant materials. High-grade steel alloys or specialized heat-resistant materials may be used to ensure the chain can withstand the elevated temperatures without significant degradation.
- 2. Lubrication: Proper lubrication is essential to reduce friction and wear, particularly in high-temperature environments. It is crucial to select lubricants specifically designed for high-temperature applications that can withstand the heat without breaking down or evaporating too quickly. Regular lubrication and inspection are necessary to maintain the lubricant’s effectiveness.
- 3. Heat Dissipation: Ensuring proper heat dissipation is important to prevent overheating of the chain. Adequate ventilation or cooling measures should be implemented, if necessary, to keep the chain operating within a safe temperature range.
- 4. Maintenance: Regular inspection and maintenance are crucial in high-temperature environments. Periodic checks for signs of wear, elongation, or damage should be performed. Proper tension adjustment and alignment should be maintained to prevent excessive stress and wear on the chain.
- 5. Operating Conditions: Consider other factors associated with high-temperature environments, such as exposure to chemicals, contaminants, or extreme temperature fluctuations. These factors may affect the chain’s performance and longevity, and additional measures may be required to ensure optimal operation.
It is important to consult the manufacturer’s guidelines and specifications to ensure that the selected drive chain is suitable for the specific high-temperature environment. By selecting the appropriate chain and implementing proper maintenance practices, a drive chain can effectively operate in high-temperature environments while maintaining performance and durability.
editor by CX 2024-04-15